← BRUT-X 300CB blog

Which KTM parts fit BRUT-X 300CB?

A sourced comparison of brakes, suspension, chassis, gaskets and engine parts.

Read the two types of evidence separately

A manufacturer catalog confirms a reference for its listed donor model. A BRUT-X 300CB fitment confirmation is a separate claim. The table identifies owner-confirmed swaps, candidates for comparison and unconfirmed components. No independent physical installation tests were performed during this research.

Matching configurations and model years

For owner-confirmed chassis and drivetrain parts, use the matching 2024+ generation, with 2026 as the reference year. PDS components follow the matching KTM enduro configuration; linkage components follow the matching Husqvarna configuration. Engine and gasket references retain their individual catalog years.

What has been confirmed

P05–P08 interchange with minor differences. P09–P11 are identical. The frame is interchangeable but described by the owner as slightly softer. The rear axle is 25 mm: the owner confirms the older KTM SX/XC 2013–2022 axle fits length, thread and spacers; 22 mm does not fit directly. Plastics, tank and seat swap as a matched kit, and headlight/mask as another matched kit.

Recommended order

Start with wear, bearings, brake condition, chain alignment and suspension settings. Record the actual component and donor part numbers before ordering. A shared gasket, diameter or appearance does not establish compatibility of an entire assembly.

Parts compatibility table

Download table CSV · 64

Parts shown: 64

Parts compatibility table
Part / assemblyReference model / ReferenceBRUT-X 300CB fitmentConditions and evidence
P01 · BrakesFront brake padsReference model / ReferenceKTM 300 EXC 2017EBC FA181BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCompare the full pad outline, pin position, thickness and actual caliper.
P02 · BrakesRear brake padsReference model / ReferenceKTM 300 EXC 2009–2022EBC FA368BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceApprox. 64 × 41.5 × 9 mm; compare the complete outline and actual caliper.
P03 · BrakesFront brake discReference model / ReferenceKTM 300 EXC 2017Galfer DF606BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck diameter, thickness, centring, bolt pattern and offset.
P04 · BrakesRear brake discReference model / ReferenceKTM 300 EXC 2017Galfer DF607BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck hub geometry, minimum thickness and the complete product suffix.
P05 · BrakesFront brake caliperReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit; minor differences remain. Exact OEM codes are not recorded.
P06 · BrakesRear caliper and carrierReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit; minor differences remain. Exact OEM codes are not recorded.
P07 · BrakesBrake master cylinderReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit; minor differences remain. Check the matched brake system.
P08 · BrakesLever and master-cylinder service kitReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit; minor differences remain. Exact service-kit codes are not recorded.
P09 · SuspensionComplete front forksReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Identical parts · interchangeable both waysConditions and evidenceOwner confirmed identical parts and both-way fit on the matching 2024+ configuration.
P10 · SuspensionFork oil seals and dust sealsReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Identical parts · interchangeable both waysConditions and evidenceOwner confirmed identical parts and both-way fit; exact seal-kit codes are not recorded.
P11 · SuspensionFork bushings, cartridges and springsReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Identical parts · interchangeable both waysConditions and evidenceOwner confirmed identical parts and both-way fit; match the actual fork configuration.
P12 · SuspensionRear shock for linkage suspensionReference model / ReferenceHusqvarna Enduro 2024+ / 2026 · linkageExact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceHusqvarna 2024+ shock fits the linkage configuration; PDS is a separate system.
P13 · SuspensionPDS shock and componentsReference model / ReferenceKTM EXC 2024+ / 2026 · PDSPDSBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceKTM 2024+ PDS parts fit the PDS configuration; do not mix with linkage.
P14 · SuspensionRear shock for linkage suspensionReference model / ReferenceHusqvarna Enduro 2024+ / 2026 · linkagelinkageBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceSame linkage shock family as P12; match the Husqvarna 2024+ configuration.
P15 · ChassisSwingarm for the matching suspensionReference model / ReferencePDS: KTM EXC 2024+ · linkage: Husqvarna Enduro 2024+PDS / linkageBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceChoose the matching PDS or linkage swingarm; owner confirmed interchangeability.
P16 · ChassisLinkage and needle bearingsReference model / ReferenceHusqvarna Enduro 2024+ · TE 300 2024A46004080044 / A46004083044 / 0618222812BRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed linkage and needle bearings; listed codes reference TE 300 2024.
P17 · ChassisMain frameReference model / ReferenceKTM / Husqvarna 2024+ · PDS / linkageExact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceInterchangeable, but different. The owner describes the BRUT-X 300CB frame as slightly softer; no stiffness measurement is supplied.
P18 · ChassisSubframeReference model / ReferenceKTM 300 EXC 2017 / 2024Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck frame mounts, seat, airbox, exhaust and load capacity.
P19 · ChassisTriple clamps and steering stemReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit with the matching KTM 2024+ configuration.
P20 · ChassisSteering-head bearingsReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit with the matching KTM 2024+ configuration.
P21 · Wheels and drivetrainFront wheelReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed both-way fit with the matching KTM 2024+ configuration.
P22 · Wheels and drivetrainRear wheelReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed the wheel with suitable bushes for the 25-mm axle; see P64.
P23 · Wheels and drivetrainWheel bearings and sealsReference model / ReferenceKTM · 2024+ / 25 mmExact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed wheel bearings and seals; keep front and rear kits separate and match the rear 25-mm assembly.
P24 · Wheels and drivetrainFront sprocketReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed matching KTM 2024+ fitment; select tooth count for the desired gearing.
P25 · Wheels and drivetrainRear sprocketReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed matching KTM 2024+ fitment; choose the required tooth count.
P26 · Wheels and drivetrainChain and chain guidesReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed matching KTM 2024+ chain and guides; chain length depends on sprockets and adjustment.
P27 · Engine gasketsCrankcase gasketReference model / ReferenceKTM 250 EXC Six Days 2017 / 300 EXC 201755430039000BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCompare holes, outline and thickness; a shared gasket does not prove identical crankcases.
P28 · Engine gasketsInner clutch-cover gasketReference model / ReferenceKTM 250 EXC Six Days 201755430025100 / 55430025000BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck revised part numbers, oil passages and the exact cover configuration.
P29 · Engine gasketsCylinder-base gasketReference model / ReferenceKTM 300 XC 201855430030050BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCorrect thickness and assembled-engine geometry must be checked.
P30 · Engine gasketsReed-case gasketReference model / ReferenceKTM 250 SX 201950430098050BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCompare holes and outline; this does not confirm the complete reed assembly.
P31 · Engine gasketsIntake-flange gasketReference model / ReferenceKTM 250 SX 201950430098060BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCompare outline, holes, sealing face and intake configuration.
P32 · Engine gasketsIgnition-cover gasketReference model / ReferenceKTM 300 EXC 2017–202355430040000 / 55430040100BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCompare cover and holes; gasket fit does not confirm stator or rotor compatibility.
P33 · Engine gasketsLeft exhaust-valve cover gasketReference model / ReferenceKTM 300 XC 201854837006000BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck the exact cover and gasket shape.
P34 · Engine gasketsRight exhaust-valve cover gasketReference model / ReferenceKTM 300 XC 201854837008000BRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck the exact cover and gasket shape.
P35 · Engine gasketsOuter cylinder-head O-ringReference model / ReferenceKTM 300 XC 20180770105020 · 105 × 2 mmBRUT-X 300CB fitment△ Candidate: compare the removed partConditions and evidenceCheck groove, material and temperature resistance; size alone is insufficient.
P36 · Engine gasketsInner cylinder-head O-ringReference model / ReferenceKTM 300 XC 20180770078020 · 78 × 2 mmBRUT-X 300CB fitment? Not confirmedConditions and evidenceNo target cross-reference confirmed; measure the groove and verify material.
P37 · Engine and clutchPistonReference model / ReferenceKTM 300 EXC 201755630107000 I / IIBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck size grade, clearance, pin height, crown, windows and ring-pin positions.
P38 · Engine and clutchPiston ringsReference model / ReferenceKTM 300 EXC 201754830132000BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck piston grooves, ring profile, locating pins and end gap in the actual cylinder.
P39 · Engine and clutchPiston pin and needle bearingReference model / ReferenceKTM 300 EXC 201754830233000 / 54430034000BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck dimensions, length, quality and matching piston/connecting rod.
P40 · Engine and clutchCylinder and piston assemblyReference model / ReferenceKTM 300 EXC 201755630038000BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck height, mounts, cooling passages, exhaust valve, exhaust and head.
P41 · Engine and clutchCylinder headReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck spark-plug arrangement, chamber, seals, squish and compression.
P42 · Engine and clutchCrankshaft and connecting rodReference model / ReferenceKTM 300 EXC 201755430118100 / 54830015244BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck stroke, width, journals, bearings, balance and drive.
P43 · Engine and clutchMain bearings and shaft sealsReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck dimensions, clearance, seal material and lubrication passages.
P44 · Engine and clutchClutch friction platesReference model / ReferenceKTM 300 EXC 201754832011100BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck plate count, thickness, splines, diameter and total stack height.
P45 · Engine and clutchClutch basket and hubReference model / ReferenceKTM 300 EXC 201779232101073 / 78132002300BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck primary drive, width, shaft, bearing and damping system.
P46 · Engine and clutchTransmission shafts, gears and shift forksReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCompare matched gear pairs, ratios, tooth profiles and axial clearances.
P47 · Engine and clutchBalancer shaftReference model / ReferenceKTM 300 EXC 201755430057100BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck bearings, gear, timing and crankcase configuration.
P48 · Cooling and electricalWater pumpReference model / ReferenceKTM 300 EXC 201779235055044 / 55435053000BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck shaft/thread, direction, clearance, seals, cover and flow.
P49 · Cooling and electricalRadiators and hosesReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck frame mounts, outlets, thermostat, tank, fan and guards.
P50 · Cooling and electricalStarter BendixReference model / ReferenceKTM 300 EXC 201755440126000BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck gears, length, engagement and direction; no target fit test recorded.
P51 · Cooling and electricalStator, rotor and CDIReference model / ReferenceKTM 300 EXC 2017 / TPI / TBIExact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck connectors, signals, triggering, voltage and coil configuration as a complete system.
P52 · Intake and exhaustComplete carburettorReference model / ReferenceKTM 300 EXC 2017Mikuni TMX38BRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck intake, airbox, cable, orientation, jetting and tuning.
P53 · Intake and exhaustCarburettor jets and needlesReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceIdentify the exact carburettor; equal jet numbers across different systems are not proof.
P54 · Intake and exhaustComplete reed-valve assemblyReference model / ReferenceKTM 250 SX 201950430151044BRUT-X 300CB fitment? Not confirmedConditions and evidenceMatching gaskets do not prove equal cage height, reeds or flange.
P55 · Intake and exhaustExpansion chamber and silencerReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck flange, angle, mounts, clearances and engine characteristics.
P56 · Intake and exhaustAir filterReference model / ReferenceKTM 300 EXC 2017Exact part number not recordedBRUT-X 300CB fitment? Not confirmedConditions and evidenceCheck sealing outline, cage and closure; similar foam is insufficient.
P57 · ConfigurationsComplete TPI system on a carburetted bikeReference model / ReferenceKTM 300 EXC TPI 2018+TPIBRUT-X 300CB fitment❌ No direct swap for this configurationConditions and evidenceA complete TPI system is not a direct replacement for a carburetted configuration; individual parts require separate checks.
P58 · ConfigurationsTBI and electronic exhaust-valve systemReference model / ReferenceKTM 300 EXC TBI 2024+TBIBRUT-X 300CB fitment❌ No direct swap for this configurationConditions and evidenceA complete TBI system and electronic exhaust valve require matching fuel, electrical and control components.
P59 · Bodywork and ergonomicsPlastics and panelsReference model / ReferenceKTM 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Replace as a matched kit · owner confirmedConditions and evidenceDifferent parts; owner confirmed replacement together with tank and seat as a matched KTM 2024+ kit, not individually.
P60 · Bodywork and ergonomicsFuel tankReference model / ReferenceKTM 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Replace as a matched kit · owner confirmedConditions and evidenceDifferent parts; owner confirmed replacement together with plastics and seat as a matched KTM 2024+ kit.
P61 · Bodywork and ergonomicsSeatReference model / ReferenceKTM 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Replace as a matched kit · owner confirmedConditions and evidenceDifferent parts; owner confirmed replacement together with plastics and tank as a matched KTM 2024+ kit.
P62 · Bodywork and ergonomicsHeadlight and maskReference model / ReferenceKTM 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Replace as a matched kit · owner confirmedConditions and evidenceDifferent headlight and mask; owner confirmed replacement together as a matching KTM 2024+ kit. Connector details are not recorded.
P63 · Bodywork and ergonomicsFootpegs and brake pedalReference model / ReferenceKTM Enduro 2024+ / 2026Exact part number not recordedBRUT-X 300CB fitment✅ Interchangeable · owner confirmedConditions and evidenceOwner confirmed matching KTM 2024+ footpegs and brake pedal; exact OEM codes are not recorded.
P64 · Wheels and drivetrainRear axle: 25 mmReference model / ReferenceKTM SX/SX-F/XC/XC-F 2013–2022 · 25 mm77710085044 · 25 mm · M25 × 1,5 · 61010086000 · 77710016000BRUT-X 300CB fitment✅ 25-mm axle fits · ❌ 22-mm axle does not fitConditions and evidenceOwner confirmed 25-mm axle fit, including length, thread and spacers. A 22-mm axle does not fit directly. Overall axle length is not numerically recorded.

Sources and confirmations